NANO V3.0 ATmega328 5V (Arduino Compatible) 16M Micro Controller

Monster Electronic




Arduino Nano is an Arduino board based on ATmega328 (Arduino Nano 3.x). It is functionally identical to the UNO, but smaller and has a breadboard-friendly footprint. It works with a Mini-B USB cable instead of a DC power jack for the external power source. It also has more or less the same electrical functionality of the Arduino Duemilanove with more analog input pins and onboard +5V AREF jumper.

The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically sensed and selected to the highest voltage source.

 Microcontroller: Atmel ATmega328

 Operating Voltage (logic level): 5 V

 Input Voltage (recommended): 7-12 V

 Input Voltage (limits): 6-20 V

 Power Consumption: 19mA

 Digital I/O Pins: 14 (of which 6 provide PWM output)

 Analog Input Pins: 8

 DC Current per I/O Pin: 40 mA

 Flash Memory: 32 KB (of which 2KB used by bootloader)



 Clock Speed: 16 MHz

 Color: Blue

 Dimensions: 0.70” x 1.70”

 Weight: 7 g


 Automatic reset during program download

 Power OK blue LED

 Green (TX), red (RX) and orange (L) LED

 +5V to AREF jumper

 Auto sensing/switching power input

 Small mini-B USB for programming and serial monitor

 ICSP header for direct program download

 Power OK blue LED on the bottom

 Standard 0.1” spacing DIP (breadboard friendly)

 Manual reset switch


 1 x Arduino Nano 3.0 Module + Header Pins


    Requires Some Assembly

    Our brands